Skip to main content
Skip table of contents

Q88 Pro - Search for vessels based on their Open Position

To search for vessels based on their open position, go to the Search Criteria on the left side and enter the required values - Refer to Q88 Pro - Search for Vessels and Update | 2.-Position-Criteria---used-to-search-for-ships-based-on-their-open-position for more info.

Did you know that the Tab moves you to the next field?

Enter the load port or load area that you wish to calculate the ETA to. Any vessel that is open in this load area will be included in the search results basis that she meets all the other search criteria.

If you want to calculate the ETA to multiple ports / areas at the same time, use the Add Loading Area as below:

If Predictive is set to YES, the open port / open date will come from the AIS data. If Predictive is set to NO, the open port / open date will come from your users updates. For more information on this refer to the Q88 Pro - Predictive Open Position

Once the search criteria have been entered, hit the Search button to perform the search.

To Save the search, hit the Save button, also shown here Q88 Pro - Main Q88 Pro Page/Open Positions | 5.-Saving-a-Search

JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.