FAQs > Error Messages > Voyage Reporting - Position Report Errors - Arrival, Departure, or Noon
Voyage No. can be explicitly set or determined by inference by the system.
|
Error Text |
Comments |
Resolution |
|---|---|---|
|
Position Report missing ROBs |
Appears if user enters all zeroes in the ROB control (with the possible exception of SPOT and RELT voyages) |
May have Track Bunkers config setting enabled incorrectly. |
|
Report designated as In Port, but date/time places it at sea. |
The Noon report was specified as In Port, but the date/time on the report corresponds to an At Sea leg of the voyage. |
Verify that the form’s date and port match the voyage itinerary. |
|
Report designated as At Sea, but date/time places it in port. |
The Noon report was specified as At Sea, but the date/time on the report corresponds to an In Port leg of the voyage. |
Verify that the form’s date and port match the voyage itinerary. |
|
ROB of xxx.xx for fuel type HFO is greater than previous value of xxx.xx |
Can be disabled by global config flag |
Master entered wrong ROB on current or previous report, or enable Allow Negative Consumption in config. |
|
Aux engine consumption exceeds total consumption for fuel type HFO |
The value entered for AUX consumption is greater than the total consumption (previous ROB - new ROB). |
Master entered wrong value; resubmit with correct value. |
|
Consumption for fuel type HFO is negative; cannot specify consumption breakdown |
|
Master entered inconsistent values. Resubmit without consumption breakdown. |
|
Bunkers ROB for HFO was entered as xxx.xx, but computed (from last ROB, consumption and bunkers received) as xxx.xx. |
Master entered inconsistent values for ROB, consumption or bunkers received. |
The system attempts to compute correct values but should be validated by Operator before resubmit. |
|
Voyage has no arrived ports. |
Departure form was not approved before completing the voyage. |
Set the voyage status back to commenced or manually input the information from the departure form if needed. |
Autonoon.exe Error Codes and What They Mean
|
Error Code |
Technical Description |
|---|---|
|
-101 |
GENERAL_ERROR |
|
-102 |
DB_CONNECT_FAILED |
|
-103 |
INVALID_XML |
|
-104 |
DB_ERROR |
|
-105 |
READ_REPORT_ERROR |
|
-106 |
GENERAL_VALIDATION_FAILED |
|
-107 |
VALIDATE_DELETE_FAILED |
|
-108 |
STORE_RPT_FAILED |
|
-109 |
INVALID_LEG_SEQ |
|
-111 |
VOYAGE_CLOSED |
|
-112 |
MISSING_TYPE_TIME |
|
-113 |
UNKNOWN_RPT_TYPE |
|
-114 |
MISSING_ROB |
|
-115 |
SET_CPMNOONLIST_FAILED |
|
-116 |
COMMENCE_VOYAGE_FAILED |
|
-117 |
UPDATE_VOYAGE_FAILED |
|
-118 |
MISSING_VOYAGE_PORTCALL |
|
-119 |
RPTTYPE_FUNCTION_MISMATCH |
|
-121 |
MISSING_ACTIVITY_NAME |
|
-122 |
MISSING_ACTIVITY_SEQ |
|
-123 |
MISSING_ACTIVITY_TIME |
|
-131 |
MISSING_CARGO_SEQ |
|
-132 |
MISSING_CARGO_NAME |
|
-133 |
MISSING_CARGO_ACTION |
|
-134 |
MISSING_CARGO_QTY |
|
-135 |
PORT_FUNCTION_MISMATCH |
|
-136 |
BERTH_NOT_FOUND |